Dye the fur white. Preparing for coloring

A fur product is purchased taking into account the fact that it will last for many years. Unfortunately, even expensive things can fade. The fur coat or vest itself is still in good condition, but her appearance leaves much to be desired. What to do with such a thing? A fur product that has lost its color should be dyed. That is why women need to figure out how to update their fur coat.

Having discovered their favorite fur coat without the original color, many ladies are very worried. Don't be upset, because the situation can be corrected, dyeing the fur. To cope with the task, you first need to decide on the color, and then on the painting method.

It is important to follow the painting instructions. If you don't do this, you can simply ruin your fur coat. In addition, it is worth remembering that before starting the painting process, the product is prepared.

Methods for dyeing fur

Modern means allow you to dye fur in any color.

Currently, there are four popular ways to dye a fur product, these include:

1. Namaz method. The method involves applying paint using a brush or a bunch of feathers. Excess paint is removed by centrifugation.
2. Fur gilding. A similar method involves bleaching the pile. It is best to use this method if you want to paint a raccoon, arctic fox, mink or fox.
3. Dipping method. This is the most common method of dyeing fur coats. The product is completely immersed in paint and remains in place until it is painted.
4. Combined method. In this way you can imitate the fur of a wild animal.

Regardless of the method chosen, the housewife must follow the instructions. Only consistent adherence to the steps will allow the product to be painted correctly.

You can create your own image

Coloring stages

Women who decide to dye fur product, you should immediately understand that the coloring process consists of several stages. If one of the steps is performed incorrectly or completely missed, the fur coat will not be painted accurately.

The painting process consists of preparation and painting. Each stage should be given Special attention. Only in this case can we hope for a positive result.

Fur cleaning

Despite the fact that you can dye a fur product yourself, you cannot immediately proceed to the dyeing process. You must first prepare your fur coat.

To do this, the fur product is cleaned of contamination. This can be done using an alkaline solution. To prepare the solution, you need to mix 3 teaspoons table salt, 1 teaspoon of dishwashing detergent, 2 teaspoons of baking soda, 1 teaspoon of ammonia solution with 1 liter. water. The resulting solution is applied to the fur product using brushes. After this, the product is washed and dried.

On next stage cleaning, needs to be processed inner part fur. To do this, it is recommended to use glycerin or fatty cream. This treatment will protect the fur from drying out.

Coloring

Painting a fur product usually takes no more than 50 minutes. The owner just needs

Piece of art

decide on the method of painting the product. Some ladies prefer to dye their fur coats with hair dyes, while others prefer sprays for dyeing fur products. Each coloring method has its own characteristics.

Spray for painting fur

You can dye a fur product using a special spray. Thanks to this product, you can give color to long ends. The spray cannot stain the undercoat and undercoat.

When spraying, the can of paint must be kept at a distance of 65 centimeters from the fur coat. In this case, the can moves slowly, without sudden movements. If you make chaotic movements, the product will be painted unevenly. Immediately after dyeing, the fur is combed. This way, excess paint can be removed.

You can also use a simple aerosol can. This method It may be cheaper, but more effective. It is also worth remembering that you do not need to paint the entire product, but only those places that have lost their original appearance.

The same case when both a fur coat and hair are dyed with hair dye

Paint for painting

The most popular way to dye fur is to use hair dyes. It should be noted that the dyeing process is carried out only on treated fur. When painting, you should pay attention to all layers of fur. Don't forget about the meat.

To distribute the paint evenly over the product, you need to knead the fur with your hands. The paint acts on the product for 40 minutes. After this, the fur must be held under running warm water. To consolidate the effect, the fur coat can be placed in brine for 10 minutes. When the dyeing process is completed, the fur coat must be dried by laying it on a horizontal surface.

How to dye arctic fox fur at home

Some women are interested in the question of how to dye a fur coat at home if it is made from Arctic fox? Like any other fur, the Arctic fox must first be processed. It should be taken into account that in bright hues It is better to color a white fox. If desired, dark furs can be dyed in light colors, but then they will first need to be decolorize with hydrogen peroxide.

Before you start dyeing, you need to test the fur. To do this, a little paint is applied to the pile of the product. If nothing serious happens to it, you can start painting.

It is best to buy 2 more packs of paint. You should paint your fur coat with a brush, after wearing rubber gloves. After painting, warm water is poured onto the product. The last stage painting is drying. The product is placed on a horizontal surface far away from heating devices .

How to dye mink fur at home

Many women are interested in the question of how to dye mink fur? In fact, there is nothing complicated. To dye mink, you can use both hair dye and sprays. If paint is used, then it can be applied to the product with a brush or toothbrush. You can evenly distribute the paint with your hands. After 40 minutes, the paint must be washed off under the pressure of warm water.

Drying is carried out in the same way as when painting other things. A mink vest or fur coat is stretched on a horizontal surface, away from heating appliances. You can use a hair dryer for quick drying. However, remember that first of all, you should dye fur precisely in order to return the product to its original appearance, and not to change it.

Instructions

If the fur is very dirty, it should be cleaned with an alkaline solution. Dyes do not penetrate well into the structure of dirty or oily hair. The cleaning solution is prepared from salt - 2-3 teaspoons, ammonia - 1 teaspoon, detergent-1 teaspoon, baking soda- 2 teaspoons per liter of water. Apply to fur with a brush. Wash and dry in a natural way.

The skin from the underside of the fur - the underside - must be pre-treated with a rich cream or glycerin to prevent it from drying out.

We dye the fur as usual. We apply paint. The fur can be pre-moistened with water so that the paint is distributed more evenly. You need to work so that you can rub the paint with your hand and avoid unpainted areas. We keep it for time as indicated on the box, depending on the color.

Afterwards, rinse the fur in warm water with the addition of vinegar. Gently blot with a towel.

Video on the topic

Natural fur always relevant. In such a fur coat it is easiest to survive the harsh Russian winter. Mink products are rightfully considered the most stylish, elegant, and chic. Sometimes it becomes necessary to dye a mink coat.

Instructions

Fur is good because in its structure and appearance it is very close to human hair. Therefore, many people dye it with hair dyes. Buy paint that you have already tested on your own. If you like it for its quality and durability, then it can also be used for dyeing natural fur.

Paint your fur coat using an aerosol or spray bottle. Carry out the procedure at a distance of approximately 50-70 cm from the fur. Moreover, be sure to rub the product with a comb or. Thanks to this, you will not only remove excess paint, but also distribute it more evenly.

Now dry the fur. Do this very carefully and slowly. A hairdryer can be used for these purposes. Brush the fur itself constantly. This is necessary so that in the future it does not get tangled or matted.

Some women, in order to add shine to the fur and soften it, after this procedure, advise using a good hair balm.

Video on the topic

note

An alternative DIY painting natural fur is to turn to specialist dry cleaners. But all such establishments will undertake this work.

Helpful advice

Experts recommend using Fara or Prestige paints for dyeing mink fur. They are most suitable for these purposes. The color can last up to eight months, and after that it will only fade slightly. True, for mink the choice of shades is very limited: red, chestnut or black. It is worth noting that the most durable color is red paint. And everyone’s favorite black color turns into brown over time.

Screen painting can be done. Thanks to this, the mink can acquire the color of a leopard.

Sometimes it happens that a fur product can last for many years, maintaining warmth and beauty, but its color has become such that you can no longer afford to wear a fur coat or hat. Sometimes the fur fades, becomes stained, sheds, and sometimes the owner simply gets tired of its color. If the color of a fur coat does not satisfy you, this is not a reason to get rid of the item. You can try changing the fur color yourself by dyeing it at home using desired color.

Instructions

When choosing a dye for fur, buy only the shade that is darker than the one in which the fur of your item is already dyed.

The product can only be painted in stainless steel barrels or in special plastic tanks using tinting agents or oxidizing dyes. The easiest way to dye a fur coat is with oxidizing agents, since they are inexpensive and allow you to dye the fur with more low temperatures, resulting in a beautiful shine.

If the fur is old, it may not survive the operation. Dirty and stained fur items are also difficult to paint - thoroughly clean the fur before painting. Prepare a solution from a liter of hot (35-38 degrees) water, dilute in it 20 g of salt, 2-3 g of ammonia 25%, and also add a gram of detergent or shampoo and a gram of baking soda. If more solution is required, increase the amount of ingredients in proportion to the increase in water. For two liters, take twice as many ingredients, for three liters - three times as much. Use the resulting solution to stain the leather until it is ready for painting.

Video on the topic

You can change the skin color of a particular product in home conditions. However, it must be taken into account that the effect will not be the same as with industrial painting. Coloring can be deep or superficial. Deep dyeing involves immersing the skin in a dye solution. For surface painting, use a brush or spray.

You will need

• Dye powder, water, basin, vinegar, salt

Instructions

Remove impurities from your skin. Decide on a leather coloring method.

Dilute the dye powder warm water and stir thoroughly. Next, strain the mixture. This is necessary in order to prevent the appearance of lumps that form stains on the area to be painted.

Pour the dye into a saucepan, add two liters of water and boil. Then remove the dye solution from the heat and cool to 45 degrees. If the solution has more high temperature, the skin will shrink when interacting with it, losing strength and elasticity.

Soak skin in warm water for several. The skin must be well wet, otherwise the wet areas will remain unpainted. You can determine whether the skin is wet enough by a string of bubbles that, if there is insufficient moisture, are released from the pores.

Pour the dye into a container that can easily accommodate. Remove the skin from the water, squeeze it out and place it in a bowl with the solution. The surface must be completely covered with dye. In addition, the product must be turned over from time to time. This will allow the paint to lay down evenly.

Set the paint. To do this, prepare a solution. Take one liter of water, a glass of vinegar and one tablespoon of salt. Mix the ingredients. Place skin into this solution.

Wring out and lay the product on wooden board face up. Soon the product will dry and will delight you with a renewed appearance.

Arctic fox fur products not only look great, but also fulfill their purpose. main function- heat preservation. The pile of arctic fox fur has longer length, therefore, both dust particles and substances from environment, which give yellowness. Not very strong stains can be cleaned, but stubborn ones will have to go to dry cleaning, because you can’t use aggressive products on delicate fur.

Instructions

Take bran or flour and heat it slightly in a frying pan. Quickly sprinkle the hot mixture onto the fur and brush with a soft brush. A fur brush can be purchased at a hardware store or even at a regular pet store. After you remove the flour from the product, shake it. It is better to do this procedure on the balcony or on the street if you live in a private house.

Dilute vinegar in 1 tbsp water. spoon per 200 ml of liquid. Dampen a soft cloth and wipe the fur over it. Then use clean water, but do not wet the product too much. If you cleaned it, put it on a three-liter jar to dry, and hang the fur coat on hangers until completely dry. Don't forget to shake the fur periodically, otherwise it will dry out and become fluffy.

You can clean the Arctic fox with aviation gasoline. To do this, soak a sponge in the liquid and gently wipe the fur. Wait until the gasoline has completely evaporated. Then rub in regular potato starch and after 10-15 minutes, thoroughly shake the fur. fresh air or vacuum on the weakest setting (preferably with a machine vacuum cleaner).

If the product is no longer used and the question of “throwing it away or cleaning it” is urgent, then there is nothing to lose and you can try washing the product. Pour warm water into the basin, add liquid powder and soak the fur in the resulting solution. How more pollution, the higher the powder concentration should be. Then rinse thoroughly and dry the product. Usually, after such a procedure, the appearance improves and the impurities disappear. If the skin becomes hard, simply rub a small amount of aviation gasoline into it.

Video on the topic

Helpful advice

If you are afraid of ruining your fur, turn to professionals. The dry cleaner will clean your contaminated fur using gentle products and modern technology.

Fur minks V modern world is becoming increasingly popular, even despite its high price. In some countries there are specialized mink farms. Fashionistas and devotees natural furs They explain that wearing a natural fur coat makes it easier to survive winter and cold weather. Mink coats popular because they are the most durable in their use. Sometimes there are times when you need to paint or repaint this item of your wardrobe in a different color to freshen it up. Of course, to dye the fur minks independently without certain skills, you need to be extremely careful so as not to spoil the thing.

You will need

• - mink fur,
• - dye,
• - aerosol.

Instructions

Since fur is very close in appearance and structure to human hair, many people resort to dyeing it with conventional hair dyes. And it’s better to buy paint that has been tested on your own, and that you like both in terms of durability and quality.

It is recommended to paint using a spray bottle or aerosol at a distance of about 50-70 cm from the fur minks and be sure to rub or comb, since this will distribute the paint more evenly and remove excess paint.

In order for the paint to apply evenly and reliably color the fur, the product must be prepared for painting. To do this, the fur surface must be cleaned of grease and dirt using special means.

Before painting it is necessary to prepare the fur

To clean you need:

1. Before that, you need to prepare an alkaline solution of ammonia, salt, soda and dishwashing detergent (you can use washing powder).
2. The resulting slurry must be spread in an even layer on the surface to be treated using a clothes brush.
3. After some time, rinse off the product with running water.

An alternative cleaning solution can be a liquid made from alcohol, vinegar and water, which is applied in the same way as the first option.

Such cleaning products are suitable for processing the fur of arctic fox, mink, silver fox and rabbit.

Typically, standard hair dye is used to refresh the Arctic fox. The fur is quite dense, and therefore you will need several packages to ensure that the resulting color is rich and uniform.

Use hair dye

In this case, you need to choose a paint one or two shades darker than the original. This will avoid unpainted areas and make the item brighter.

Before covering the entire area with paint, you should try to treat small area. This will allow you to see how the color changes under the influence of chemicals.

Before full dyeing, check how the fur reacts to the dye.

In case of color fading (especially the tips of the pile), it is better not to dye the fur, but to lighten it. The main thing in this procedure is to choose the right composition for coloring. For this purpose, hydrogen peroxide and ammonia, taken in different proportions.

Tinted hair balm is an alternative to permanent dye.

Toning with tint balms

It will help gently color the pile, providing necessary care fur products. However, this method of solving the problem is not durable, since the balm is gradually washed off when precipitation occurs in the form of snow and rain, and can also contaminate light-colored items located in close proximity to the fur.

Items made from arctic fox fur often lose their attractiveness due to yellowing of the ends of the pile. In this case, there is no need to paint the entire product. It is enough to use an aerosol can to treat suede.

Aerosol spray for painting

Before you dye arctic fox fur at home, you need to choose a suitable shade and spray it on the surface at a distance of about 70cm. To prevent the pile from sticking together, you need to constantly move the can. After applying the paint, the fur should be combed with a special brush for suede. Moreover, this must be done immediately.

In specialized stores, it is fashionable to purchase special paint in cans for caring for fur. With their help, you can quickly update the shade, making the product brighter.

Professional paint for fur

However, it also has some disadvantages: when it comes into contact with white items or a light fur coat, the dye can be transferred to lighter items. And the color itself will lose its shine and brightness within a few months.

Since mink products are considered quite expensive, dyeing of such fur should be done as delicately as possible.

Before that, you need to check the degree of contamination of the pile. A regular hairdryer will do for this. The air stream should be directed at the pile: if the fibers fall apart, cleaning is unnecessary. However, if the lint moves from one side to the other and clumps together, cleaning may be necessary.

Mink fur is dyed with hair dye

Step by step procedure

The sequence of actions in both cases is identical:

1. To start painting, you need to put on gloves and take a brush. After this, apply paint to the surface and smear it so that there are no bright spots left.
2. After waiting the time indicated on the packaging of the product, the product must be rinsed with water. room temperature with vinegar. To fix the pigments and make the pile shiny and soft, you need to use the balm that comes with the paint.
3. Then it needs to be washed off and dried.

1. Only a cleaned product can be dyed so that dirt and grease do not prevent the pigment from penetrating into the villi.
2. When preparing a product for dyeing, the underside of the leather should be covered with cream (or Vaseline) to prevent the surface from drying out.
3. Fur can only be dyed if it is not too old. Otherwise, it may be damaged during color change. In addition, the risk of mechanical damage to the product will increase significantly.
4. You should choose a dye tone darker than the natural pile. This will help hide minor defects skins and will give a natural shade.
5. To renew fox fur, you can use a solution of manganese, diluted to a dark brown tint. You need to apply it to the pile with a sponge, without touching the inner layer (skin). If you neglect to be careful, you can damage the base of the fur, which will lead to rapid wear of the item.
6. Since the skins may shrink after dyeing, you need to place the product on a flat surface and secure it before applying the dye using pins or thin nails.

By using some fur care tricks, you can provide an attractive appearance to the product and extend its wear life.

Fur dyeing at home

Many people probably already have a couple of dozen things accumulated in their closets. And it seems a shame to throw it away, and it’s no longer possible to wear it. It is possible that you will show your talents and decide to create something completely new and unique from an old fur item, but this will not make the fur the same color. You can, of course, contact a specialist and he will return it to its former beauty. This requires financial investment. But you can resort to another method and dye the fur at home.

Fur products always attract attention. No wonder, because they look beautiful and rich. And in the cold season they also warm well, and there is no need to make a choice between beauty and warmth. But, like any thing, over time they lose their properties. The product may still be neat and look decent, but the color changes. And this pretty much spoils the original appearance.

How to determine fur color?

First you need to determine what color you want. It is recommended to paint fur products in colors that are a tone lower than the original one. But you can also highlight it. Especially if your product was white and turned yellow over time. In this case, there are two options: either make the fur dark, or try to return the color that was when you purchased it.

Definition color range fur

We will consider the first option later. And in order to return White color, you can purchase paint that is used for suede products. They are sold in cans. There is no need to paint along the entire length; only the ends can be treated. Spray the composition of the can at a distance of 60-70 cm. Try to apply it to all visible areas. To prevent fur from sticking together, comb the product immediately after the procedure.

Recipes for paint solution

Before you dye your fur at home, you first need to prepare it for this. Remember that paint does not work well on dirty or greasy items. It just won't penetrate deep. So first clean the item of dirt and grease. In this case, two types of solution are used. First: 1 liter of water, ammonia 25%, about 6-7 grams, add 20 g of salt and 1-2 grams of baking soda. It is advisable to add another 1 g of detergent. Then soak the product for an hour, stirring it occasionally, then wring it out and rinse thoroughly with water.

Basic recipes for painting

Second option: dilute half a kilo of slaked lime in 10 liters of water, add about 150 grams of alum and more inkstone about 250 grams. There are many more options, these are some of the most popular. You can just wash the item laundry soap. Even shampoo for oily hair will do. Just don't rub too hard to avoid damaging the fur. Please note that in order to dye fur at home, you need to take care of the skin itself.

Solutions can deplete it. To prevent this situation, you should first apply glycerin or fatty cream to the wrong side. After cleaning, the item is fixed on a flat surface. The skin needs to be stretched a little. On the same surface, the fur should be completely dry.

Method of dyeing fur yourself

If you decide to change the color of a product globally, you should first bleach it. Do you think it's difficult? No, it's very similar to hair dyeing. The procedure is approximately the same. Afterwards, lighten the color after dyeing and bring it as close as possible to the color indicated on the package. You can, of course, use regular peroxide. Before you dye your fur at home, do a little experiment. Apply hair dye of the selected color to a small area that is not visible when worn.

Paint the house

This way you can evaluate the appearance of the product after the procedure. Don’t risk resorting to changing the whole thing at once. All paint manufacturers write that the final result may differ from that indicated. Especially if the fur is initially very dark. So, how to dye fur at home? Protect your hands with gloves and apply quickly. See if all areas have been treated. You need to soak the paint for as long as indicated in the instructions. After the procedure, rinse the dyed fur with water.

Fur dyeing at home

You can make a solution from water and vinegar. Just like after coloring your hair, you need to apply a balm. This addition will give a beautiful shine and shine to the fur. And rinse again with water. Dry gently using a towel. You can make the color completely unique by using the method used for highlighting. More precisely, paint only some areas and wrap them in foil. The result is specks of a different color against the background of the main one. Your clothes will be unusual, original and eye-catching.

After painting the color will be irresistible

The product treated in this way must be cared for as before. The effect after the procedure lasts about 8 months. Further color depends on both the type of fur and the product that was used. So the procedure will have to be repeated again. But with the experience gained, it will be much easier. And you can easily choose suitable color, practice and create something completely extraordinary.

Natural fur and its dyeing

Dyeing natural fur has its own characteristics. For example, the Arctic fox successfully maintains color and lends itself well to such experiments. And the mink is already worse. Beaver reacts to lightening yellow, and the muskrat will surprise you with its unusual peach shade with a white bottom. Over time, the paint fades and takes on a completely different look. A dark solution of potassium permanganate will help restore the fox's brown tint.

Suede paint should be used if and only if you do not want to dye the entire fur. It will help give a new shade only to the ends of the fur and nothing more. So you learned the basic ways to restore things to their former beauty. Based on your experience of dyeing your own hair, if you have had one, choose a dye. It’s too cheap and may lose its appearance in just a week, so you shouldn’t skimp on such an important matter. You can learn more about how fur is dyed from the video.

Natural fur will conquer anyone

There are many salons and dry cleaners where you can apply for fur dyeing procedures. There, a professional will take care of your favorite thing. After everything is ready, carefully inspect the result to ensure it matches your wishes. Be careful and don’t rush to run home in joy, first evaluate the product.

Video

Products made from natural fur will never go out of fashion. And all because they are not only warm and comfortable, but also expensive and stylish. A real fur coat or vest made of arctic fox fur is an indicator of wealth and high taste. But what to do if the fur has deteriorated from age and has become faded or dull. Or you accidentally stained a product, but you can’t get rid of the stain. In this case, you just need to re-dye the fur and breathe into the clothes new life. And indeed, the painted Arctic fox looks new, as if you treated yourself to another expensive purchase.

Cleaning the fur before painting

In order for the paint to apply evenly, completely color the fur and not leave pale areas, the product must be cleaned. To do this, prepare a solution from the following ingredients:

• 2 tablespoons salt;
• a tablespoon of ammonia;
• 2 tablespoons of baking soda;
• a tablespoon of powder;
• 2 liters of warm (not hot) water.

Mix all the ingredients and carefully apply the resulting mixture to the fur. Brush over the fur item. Make sure that not only the top, but also the bottom of the fur is cleaned. After this, wipe the fur several times with a clean, damp cloth to remove soap composition. Skin with reverse side called mezdra. If possible, it should not be wetted, otherwise it may shrink.

Dry the fur in natural conditions– no hair dryer or heater. Do not leave fur items under straight sun rays. It is better to hang the fur coat or collar on a hanger and leave it in a well-ventilated place.

As you know, fur can be dyed in special workshops. But the price of such a service is quite high, and besides, you will get an unexpected result. If you dye arctic fox fur at home, you can independently control the process and, if necessary, influence it. So, how to transform a fur product?

1. First you need to choose a paint. You can find special paint for fur in hardware stores. It is designed for a similar wool structure and fits perfectly onto the fibers. If you can’t find such a dye, you can use ordinary hair dye. Here you see a wide palette - from black to reddish-chestnut. It is important to take into account that you need to dye fur in more dark colors(relative to the native shade). Keep in mind that over time, tan fur will turn rusty or red, and black fur will take on a dirty brown hue.
2. Dilute the paint according to the instructions. To do this, carefully observe all proportions and water temperature. Wear gloves and a respirator - inhaling paint fumes is quite harmful.
3. Lubricate the flesh with fatty baby cream, glycerin or Vaseline. This will protect the skin from drying out and also prevent it from getting too wet.
4. You can dye a fur coat both dry and wet. Therefore, painting usually follows cleaning the product - wet lint helps the paint apply more softly. Take an ordinary brush that hairdressers use to color strands and apply paint to the fur. This must be done quickly, but carefully. Paint over all areas so that there are no light patches left.
5. To give the fur a special color, you can paint the product with several colors using a stencil. To do this, take a thick piece of cardboard and cut small asymmetrical holes on it. Apply the resulting stencil to the fur and paint the fur in certain areas brown. Next step is to paint the center brown spots in black. This will give you a bright leopard print color.
6. The fur can be dyed not completely, but only its ends. This way you will get a rich and saturated shade. Most often, the ends of the villi are made lighter.
7. A great way to freshen up the product is to paint the ends of the bristles with a special paint for suede, which is sold in aerosol form. Keep the can at a sufficiently large distance and move evenly. This is much easier and faster than classic fur dyeing.
8. After this, leave the fur for the time indicated on the paint package. Usually 30 minutes is enough to get the desired shade.
9. Rinse the fur item thoroughly so that no paint remains on it.
10. Dilute five tablespoons of vinegar in a couple of liters of cool water. Rinse the product in this solution. Vinegar will help maintain softness and shine, and also lock in the color. After this, blot the fur with a dry towel.
11. To prevent the arctic fox from shrinking when drying, the inside needs to be stretched. To do this, use clothespins to hook the edges of the product and stretch it on the table. This way you will prevent deformation.

You need to dry the fur in a ventilated area, possibly on the balcony. Under no circumstances should you dry your Arctic fox in the sun, near a radiator, or with a hair dryer. Brush the fur periodically to prevent it from drying out randomly.

How to dye arctic fox fur a light shade

If natural fur The Arctic fox is already quite dark, but you don’t want to paint it a more saturated shade; it should first be bleached. This can be done using a special hair bleach or simple hydrogen peroxide.

Dilute the lightening paint according to the instructions. If you are using hydrogen peroxide, dilute it with water in a ratio of 1:3. Apply the prepared product to the fur and leave for 10-15 minutes. It is not recommended to keep the bleaching composition on for a long time, otherwise the villi may become brittle. In this case, you risk being left without fur at all. After this, rinse the fur and leave to dry. Fur can be dyed after bleaching only after the product has completely dried. You should not lighten or dye your fur several times. Once will be enough, otherwise you can irreversibly damage the structure of the villi.

Don’t rush to give up your tired or damaged fur item. Ingenuity, imagination and a competent approach will allow you to update your winter products. Shine and change without cheating on yourself!

Video: how to dye fur at home